The standard puppet house is cut out of chipboard or ordinary plywood and calculated as follows: ceilings about 30 cm high, each room 30 cm. in width and 80 in length (so that the dolls have spaciousness). The height of the entire house is to choose from: 2 floors 60 cm or 3 stages 90 cm. To fasten all parts (if the house is from plywood, which is cheaper and faster) may need self -tapping screws, but in an ideal version it is best to do without them and make a house easier. To do this, it is enough to make long incisions on the longest plywood (this is the floor of the first and second floor) in these cuts can be inserted with facade and interior walls. The roof is attached absolutely similarly, the interior walls are simply made a little longer and inserted into special incisions in the roof of the house. Thus, the design is attached due to the correct location of the cuts and in terms of security is the best option. Since when playing the child does not inject the sharp edge of the nail and will be able to play calmly without breathing the pungent smell of glue, which can keep a decent amount of time.
